The latest firmware of S19pro has been uploaded on Bitmain official website, the power efficiency is enhanced by 13.6%, 25.5J/T.
You can download the firmware by clicking here.
T17+ Specifications
| Hash rate | 64T±5% 61T±5% 58T±5% 55T±5% 52T±5% |
| Frequency | Auto |
| Fan | 4 fans @ 12 V and 2.4 A |
| Fan speed | 6000 rpm |
| Operating temperature | 0~40°C |
| Surrounding humidity | 10%~90%（non-condensing） |
| Noise (dBA,25°C） | 82 dB |
| No. of PCIE connectors | 1 |
| No. of hash board | 3 |
| No. of chips | 132 in total |
| PCB high temp protection | 75 °C |
| Power consumption | 3200+10% 3050+10% 2900+10% 2750+10% 2600+10% |
| Efficiency | 50J/T± 10% |
| Voltage | built-in PSU |
| Weight | 10.2 KG |
| Dimensions | 298.2*178*304.3mm |
| Packing weight | 11.3 KG |
| Packing dimensions | 486*388*265mm |
How to set up a new Antminer S19/S19Pro
First, inspect the new miner
1. Visually inspect the box when your miner package arrives. Look for signs of damage. If a package is damaged, take photos of the package’s conditions before proceeding to open the package and inspect the miner. If the miner is damaged as well, contact customer support immediately.
2. Inspect the miner for aesthetic damage. Look at the corners of the miner and check for dents and cracks. Look out for broken fan blades, cables, and bent connectors. If you noticed damage or defect, contact customer support immediately.
3. Assess the miner’s heat sinks. View from the miner’s front and rear fan to check whether there are loose heat sinks. If you found loose heat sinks, contact customer support immediately.
4. Examine the miner’s cables and connectors. Make sure they are not loose or broken.
Know the precautions for use
1) PoE is not supported.
2) Only Ethernet network connection is supported via a router or switch.
3) Use the miner in an environment between 5 to 35 degrees Celsius.
4) Keep the miner’s surrounding humidity below 65%
5) Keep the miner free of dust and catkins to prevent corrosion and/or heat accumulation.
6) Supported browsers: Google Chrome and Firefox.
7) Power connector and PSU cord must be plugged tightly.
1.S19/S19 Pro server overview
Caution:
- Please refer to the layout above to place your goods in usage in case of any damage.
- The equipment must be connected to an earthed mains socket-outlet. The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The equipment has two power inputs, only by connecting those two power supply sockets simultaneously can the equipment run. When the equipment is powered off, be sure to power off all power inputs.
- DO NOT remove any screws and cables tied on the product.
- DO NOT PRESS the metal button on the cover.
1.1 S19/19 Pro Server Components
The main components and controller front panel of S19/S19 Pro servers are shown in the following figure:
1.2 APW12 Power supply：
Note:
- Power supply APW12 is part of S19/S19 Pro server. For detailed parameters, please refer to the specifications below.
2. Additional two power cords are needed.
Innosilicon A10 Specifications
Innosilicon A10 Pro ETH miner with 6G memory is an upgraded version optimized for ETH mining, performing with a power-efficient hash rate of 500MH/S at 950W.
- Hashrate:500MH/s (±5%)
- Power Consumption:950W(±10%, on wall, with 93% efficiency PSU, 25℃ temperature)
- Dimensions:(L)360mm*(W)136mm*(H)282mm
- Net Weight:8.6Kg
- Internet connection:Ethernet
- Ambient Temperature:0°C to 40°C
Please note that they are not new miners and after upgrading the machine may not be refurbished, if you expect a high-standard appearance, your discretion is strongly advised. Once the order is placed, it will be deemed as an acceptance.
Notice:
Please make sure your farm uses proper cooling, dust filter and 10A AC cable to meet the proper operating condition requirements.
Humidity <75%, AC voltage 210~240V, Power supply AC input current 10A, dust <0.5 Mg/m3.
Antminer L3++ Specifications
| Hash rate | 580M |
| Frequency | 450M |
| Fan | 2 fans @ 12 V and 2.4 A |
| Fan speed | Front: 4500 rpm, rear:4500 rpm |
| Operating temperature | 0 – 40°C |
| Surrounding humidity | 5%~95%（non-condensing） |
| Noise | 60 dB |
| No. of PCIE connectors | 9 |
| No. of hash board | 4 |
| No. of chips | 288 in total |
| Chip temperature | 90°C |
| Power consumption | 942 ± 10% |
| Efficiency | 1.9J/MH±10% |
| Voltage | 11.6 – 13 V |
| Weight | 4.7 KG |
| Dimensions | 352 x 130 x 187 mm |
| Packing weight | 6.5 KG |
| Packing dimensions | 465 x 215 x 305 mm |
Antminer T19 Specifications
T19 84T
| Product Glance | Value |
| Version Crypto Algorithm/Coins | T19 SHA256/BTC/BCH |
| Hashrate, TH/s | 84±3% |
| Reference power on the wall, Watt | 3150±5% |
| Reference power efficiency on wall @25°C, J/TH | 37.5±%5 |
| Hardware Configuration | |
| Networking connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package),mm | 400*195.5*290 |
| Miner Size (Length*Width*Height, with package),mm | 570*316*430 |
| Net weight, kg | 14.2 |
| Gross weight, kg | 16.0 |
Antminer S9 Specifications
| Hash rate | 10T 10.5T 11T 11.5T 12T 12.5T 13T 13.5T 14T |
| Frequency | Auto |
| Fan | 2 fans @ 12 V and 2.4 A |
| Fan speed | Front: 6000 rpm, rear:4500 rpm |
| Operating temperature | 15 – 35°C |
| Surrounding humidity | ≤65% |
| Noise | 76 dB |
| No. of PCIE connectors | 10 |
| No. of hash board | 3 |
| No. of chips | 189 in total |
| Chip temperature | 135°C |
| Power consumption | 980 + 10% 1029 + 10% 1078 + 10% 1127 + 10% 1176 + 10% 1225 + 10% 1274 + 10% 1350 + 12% 1400 + 12% |
| Efficiency | 13T: 100J/TH + 10% 14T: 96J/TH + 10% |
| Voltage | 11.6 – 13 V |
| Weight | 4.50 KG |
| Dimensions | 350 x 135 x 158 mm |
| Packing weight | 5.5 KG |
| Packing dimensions | 445 x 215 x 255 mm |
Antminer DR5 Specifications
DR5 35T
| Hashrate | 35T±2% |
| Frequency | 600M |
| Fan | 2 fans @ 12 V and 2.4 A |
| Fan speed | Front: 4600 rpm, rear:4600 rpm |
| Operating temperature | 0 – 40°C |
| Surrounding humidity | 5%~95%（non-condensing） |
| Noise | 76 dB |
| No. of PCIE connectors | 10 |
| No. of hash board | 3 |
| No. of chips | 216 in total |
| Chip temperature | 85°C |
| Power consumption | 1610 ± 7% |
| Efficiency | 46J/TH±7% |
| Voltage | PSU attached |
| Weight | 7.8 KG |
| Dimensions | 238 x 297 x 178 mm |
| Packing weight | 9.4 KG |
| Packing dimensions | 486 x 388 x 265 mm |
Antminer S19j Specifications
S19j 94T
| Product Glance | Value |
| Version | S19j |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 94 + 3% |
| power on wall@25℃, Watt | 3243 ± 5% |
| power efficiency on wall @25°C, J/TH | 34.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j 90T
| Product Glance | Value |
| Version | S19j |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 90 + 3% |
| power on wall@25℃, Watt | 3105 ± 5% |
| power efficiency on wall @25°C, J/TH | 34.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j 86T
| Product Glance | Value |
| Version | S19j |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 86 + 3% |
| power on wall@25℃, Watt | 2967 ± 5% |
| power efficiency on wall @25°C, J/TH | 34.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j 82T
| Product Glance | Value |
| Version | S19j |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 82 + 3% |
| power on wall@25℃, Watt | 2829 ± 5% |
| power efficiency on wall @25°C, J/TH | 34.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
Antminer S19jPro Specifications
S19j Pro 104T
| Product Glance | Value |
| Version | S19j Pro |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 104 ± 3% |
| power on wall@25℃, Watt | 3068 ± 5% |
| power efficiency on wall @25°C, J/TH | 29.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j Pro 100T
| Product Glance | Value |
| Version | S19j Pro |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 100 ± 3% |
| power on wall@25℃, Watt | 2950 ± 5% |
| power efficiency on wall @25°C, J/TH | 29.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j Pro 96T
| Product Glance | Value |
| Version | S19j Pro |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 96 ± 3% |
| power on wall@25℃, Watt | 2832 ± 5% |
| power efficiency on wall @25°C, J/TH | 29.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
S19j Pro 92T
| Product Glance | Value |
| Version | S19j Pro |
| Model | 240-Cb |
| Crypto Algorithm/Coins | SHA256/BTC/BCH |
| Hashrate, TH/s | 92 ± 3% |
| power on wall@25℃, Watt | 2714 ± 5% |
| power efficiency on wall @25°C, J/TH | 29.5 ± 5% |
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 400*195.5*290 |
| Miner Size (Length*Width*Height, with the package), mm | 570*316*430 |
| Net weight, kg (2-2) | 14.6 |
| Gross weight, kg | 15.8 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
（1-1）Caution: Wrong input voltage may probably cause miner damaged
（1-2）Max condition: temperature 40°C, altitude 0m
（1-3）Two AC input wires, 10A per wire
（2-1）Including PSU size
（2-2）Including PSU weight
（3-1）When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m